This ventilated 6-door steel locker is built for school locker rooms and gym changing areas. The body is cold-rolled steel with a powder-coated finish — rust resistant and scratch resistant. Six separate compartments, each with its own lock. Students get one for gym clothes. Gym members get one for their bag. Nobody shares, nobody worries.
It stands 1800mm tall, 460mm deep, and 850mm wide. Each compartment has enough room for a school uniform plus sneakers, or a gym bag and a change of clothes. The gap at the bottom lets the cleaning mop pass through.
Three things matter: ventilation to keep smells out, a lock on every door, and a surface that doesn’t scratch off. Schools see hundreds of door slams a day. Gyms get wet towels shoved in after every workout. This locker handles both.
Ventilated Steel Locker for School Gym Storage 6 Door Specifications
| Parameter | Value |
|---|---|
| Body material | Cold-rolled steel (commercial grade) |
| Surface finish | Powder coated (RAL color, customizable) |
| Construction | Fully welded |
| Doors | 6 (6 individual compartments) |
| Overall size | 850 × 460 × 1800mm (W × D × H) |
| Lock type | Individual door lock (key / combination / digital) |
| Ventilation | Vents on door panels (top and bottom) |
| Assembly | Pre-assembled or KD (knock-down) |
| Best for | School locker rooms, gyms, sports facilities |
Key Features
Ventilated doors keep odors and moisture out
The worst thing about lockers is opening one that smells like last week’s gym clothes. Each door on this unit has vents at the top and bottom — natural airflow circulates through. Wet towels in a gym locker? Damp PE kit after afternoon sports? Air moves through, nothing gets trapped. Less moisture means less mold and mildew too.
Individual locks, each compartment independent
Six doors, six locks. Choose key locks, combination locks, or digital locks depending on your budget and setup. Schools usually go with key locks — cheap and simple. Gyms prefer combination locks because members don’t carry keys to the shower.
The lock cylinder is brass pin tumbler — the same type used in commercial-grade padlocks. Not a cheap spring latch that you can pop with a credit card.
School lockers get opened and slammed shut hundreds of times a day by dozens of students. The hinges on this unit are reinforced steel — not the thin wire type that bends after a year. Good hinges are the difference between a locker that lasts ten years and one that’s wobbly after two.
Powder-coated finish that scrubs clean
School janitors wipe locker fronts every night. Gym cleaners spray disinfectant and scrub. This cabinet uses electrostatic powder coating — baked on at high temperature, harder than paint. Scrubbing with bleach wipes won’t dull it. Scratches from bags and backpacks won’t show.
Every school has that one bank of lockers where the paint chipped off and rust spots showed up. That doesn’t happen here.
Fully welded, no bolts to loosen
The whole cabinet is welded together. Not bolted. Not screwed. When students run down the hall and bump into the lockers, a welded frame doesn’t shift. The doors stay aligned, the gaps stay even, the locks still line up.
Right-sized for schools and gyms
Each compartment sits at 850 × 460 × 1800mm. Tall enough to hang a jacket or coat. Deep enough for a gym bag with shoes. Six compartments per unit means a class of 42 students needs seven units in a row — that’s a standard wall length in most schools.
For gyms: gym bags are bigger than school bags, but 460mm depth handles most standard duffel bags comfortably. And yes — you can match the color to your brand or facility. RAL color customization is available at no extra charge.
Where to Use
School locker rooms
Ten-minute class changes mean forty students hitting the locker room at once. Six compartments per unit, each one lockable. The PE teacher’s worst phone call: “My phone was in my locker and it’s gone.” With individual locks — key or combination — that conversation gets a lot simpler.
Gym changing areas
Gym lockers get the heaviest use of any locker type — morning and evening rush, each compartment opened and closed multiple times per day. Ventilation matters most here. Wet towels, damp workout clothes, sneakers — without airflow, a gym locker smells like a wet dog within 24 hours. The built-in vents on these doors are designed exactly for that.
School swimming pools
Indoor pool areas are humid — standard painted lockers rust within a year. Powder-coated steel handles moisture much better than spray paint, and the airflow keeps the insides dry. Schools have tight budgets — stainless steel lockers cost more than most can afford. This unit is the best value option for pool-side storage.
Training centers and sports academies
Basketball camps, dance studios, martial arts schools — high student throughput, constant use. These 6-door units are a standard size that lines up neatly in rows. Facility managers know exactly what price points buy which quality level. This one sits at “worth every penny.”
Installation
Available pre-assembled or knock-down (KD). Pre-assembled units come fully welded — just place them and they’re ready. KD units ship as flat panels with hardware and get assembled on-site — lower freight costs, better for container shipping overseas.
No special tools needed either way. Two people can position a pre-assembled unit. For KD units, three workers can put together twenty to thirty units in half a day.
If you’re sourcing lockers for a school or gym, ask for a sample unit first. Check the door swing, test the lock, look at the finish. There’s no substitute for seeing the real thing. Every locker from Hengna goes through structural inspection and coating adhesion testing before leaving the factory. Sample units are available for bulk orders.
Get a Quote
Luoyang Hengna Office Furniture Co., Ltd. manufactures commercial-grade steel lockers for schools, gyms, factories, and hospitals worldwide. Standard sizes in stock. Custom sizes delivered in 4 weeks. Send us your quantity and delivery location — we’ll reply within 24 hours with specs and pricing.
